computers

Clamp front chest 7: the spreadsheet!
by

Clamp front chest 7: the spreadsheet!

The consumer may assume their consumption pattern sets them apart from the rest of society, marking them as an individual, but this is a fallacy. Consumption is one of our most creative and most restrictive practices. Due to this fact it must be concluded that consumer driven production of self is less to do with “who am I” and more with “who are we” or “with whom do I belong.” There is no such thing as individualization no matter what we may think.

Todd, D. 2012

 IMG_1893
 I don’t like cutting lists. Many amateurs, myself included, work wood to have something individual, something that says something about us (who knows what?). Building from a cutting list or a set of plans in a book or magazine gives us the illusion of creativity. But that creativity is restricted by the choice available.
Ultimately we are building someone else’s design. What kind of individualism is this that we conform to someone else’s notion of individualism?
But what is the alternative? A thorough grounding in the principles of design? Will this liberate us from the “restrictive practices” of buying furniture from the multinational corporation or building it to the designs laid out by other woodworkers? Or are we then just subject to the same set of principles by which they operate?
Let’s break free from the cutting list!
And how shall we throw off the shackles of our corporate overlords? With a spreadsheet of course!

This spreadsheet will enable you to enter dimensions for a clamp front chest of your own ‘design’. You might not be able to enter your desired dimension into the embedded sheet above (it’s a little temperamental).  If you want to try it out click here to go to the full, unabridged Google Sheets version.

If the figures you enter are changing it’s because someone else is using it. If you want to keep your own dimensions use the link above and download the spreadsheet (File/Download as…) or open a copy in Google Sheets (File/Make a copy…).

You can select the outside dimensions of the chest you want to build, decide if you want to make clamped (breadboard) ends for your lid and choose the length of the legs in relation to the rest of the chest. As you enter this data the spreadsheet will work out your cut list and spit it out in an easily digested table. Voila, instant liberation from the strictures of design dogma and the restrictions on your identity of consumer culture. You lucky thing.

But it won’t draw it for you.

Bear in mind that the spreadsheet doesn’t care about proportion or aesthetics. It has some concept of the required thickness of planking for different sized chests but it’s not very bright (I shouldn’t anthropomorphise my spreadsheets, they hate that). Magazine writers/woodworkers are better at this sort of thing than spreadsheets (there’s feint praise!).

Caveat utilitor

I don’t guarantee the results of this spreadsheet in any way. If you use it to design a series of chests to sell from your burgeoning Etsy store and have several cubic metres of timber cut to length only to discover that the I haven’t calculated the tenon length correctly or included the lid overhang it’s entirely on you.

Last word

Please don’t use this. Draw a chest using your own hands and eyes. It will be better and it will be yours.

But if you do use it please let me know how it goes!

 

by

Endless fiddling

gabriola-alphabet-verticalIf you’re a font geek read on. No timber will harmed in the writing of this blog post. Come back later if you want to see wood worked. In the meantime it’ll be electrons and bits of paper.

I’ve been looking for a new font to carve. I like Roman lettering but for some jobs it’s a bit severe. The usual alternatives, like Celtic, are an acquired taste but work well for some applications. It’s not as simple as clicking on the font menu in Word and choosing one you like the look of. Fonts for carving have to fulfill certain criteria that typed fonts, many of which originated from pen-drawn fonts, won’t achieve. The spidery curlicues of copper plate are unsatisfying to carve and don’t read well when they’re finished. But I like the softer edges and curves of pen-drawn fonts.

I have found a font with some promise. Gabriola is clearly derived from a Roman font but has softer serifs and a certain energy that it gets from its forward sloping axis. The R is always the deal-breaker for me. If the diagonal starts too far along the bottom of the curve it looks a little inflated. If it’s touching the upright it feels pinched. I like this R. I was convinced to try carving the font when I saw the way the tail of the Q extends under other letters.

I’m not entirely convinced by the half serif. The curved upper may have to go. We’ll see. And the K is just asking for trouble. That upper diagonal was born of a paint brush and has no place in a carved font.

Why all the hand-wringing?

I’ve had a couple of cracks at a banner for this blog and haven’t entirely liked the results. This one has promise.

I do most of my layout in Adobe Illustrator. I used to draw or print individual letters and then move them around until I found the right spacing. Fonts in computers have an in-built spacing, or kerning. Some pairs of letters will automatically move closer or further apart. This works well for most documents when the eye passes over the lettering very quickly but when the lettering is the whole point of the job you need a bit more precision. Illustrator has the ability to change the kerning of every pair of letters in an entire document. Look at the spacing the computer gave me to start with:tqw-v2

There’s a lot of room between the O and the R but the K and S are rather cramped. We can solve this with a bit of kerning:

tqw-v3

I’ve also taken out a bit of space between the T and the H and given a bit more room in the middle of QUIET. I’ve moved the P and the O in a fraction at the end that makes them feel a little more connected.

I was happy with this on the screen. Then I printed it and realised that all my letters are a bit spindly. They’ll have very little weight if carved like this. Illustrator again: rather than just regular and bold you can choose the weight of each line. A few shades heavier and we’ve got something that might carve well:

tqw-v4

The added weight has cramped up a few letters so once more I was back to fiddling with kerning:

tqw-v5

I think we’re there. Perhaps a bit more space between the U and the I? Possibly. Maybe next time. I’ve spent more than long enough at the computer today. Time to hit sharp things with heavy things.